lift trucks equipment - surge tanks - equipment
Header: 26.62" x 6.00"
This tank has two 3/8" pipes (one on a 45 degree angle, and the other strait out), a 1.00" diameter hose connection, a mounting bracket on each side of the tank, and a 1.37" diameter hole on the top for a filler neck.
Header: 33.50" x 7.50" 42 Bolt Holes Complete Set with Surge Tank
Top Tank This tank has a 3.00" diameter hose connection 5.00" long, a 1.00" NPT coupling in the top center for a fill line, and four threaded blocks (two on each side) with two 1/2" NC threaded holes for mounting the side frames. Bottom Tank This tank has a 3.00" diameter hose connection 5.00" long, a 3/4" NPT fitting for a drain, and two threaded block (two on each side) with two 1/2" NC threaded holes for mounting the side frames. Side Frames These frames have six slotted holes to attach to the tanks, two holes in the foot of the frame to mount to the floor, and two brackets coming off the top to attach the surge tank. Surge Tank This tank is 33.50" wide, 5.00" deep, and 12.00" high, with four threaded blocks with two 1/2" NC threaded holes to attach the side frames, two support feet on the bottom 4.00" tall, a hole in the top center for a filler neck, and a 1.00" NPT fitting in the bottom center for the last fill line.
19.25" x 8.75" x 8.00" Surge Tank
This surge tank has a 3/4" diameter bypass connection, a 1.00" diameter hose connection, three angle brackets with slotted holes for mounting, three 1/4" NPT flanges and a 1" NPT flange on the end of the tank, a 1/4" NPT flange on the side of the tank, and a recess with a hole to accommodate a filler neck.