This tank has a 2.50 diameter hose connection PTO cutout in the center of the tank with a 1/4″ NPT flange on each side 2 – 1/2″” NC threaded nuts for mounting purposes.
This Bus plate oil cooler core assembly inserts into a number of Bus oil cooler tanks with the header size of: 16.50 x 12.75″ and 30 BH – including #BS 082306C
Top and Bottom Tanks: 2.50 NPT coupling 1/4″ NPT flange Side Frames: These frames have flanges that are 7.87″” wide x 6.00″” deep 2 – 1/2″” NC threaded holes to accommodate lifting hooks Note: this set is supplied with four washer bars 30.37″” long with 15 bolt holes.
Top Tank: This tank has a 4.00 NPT coupling A hole for a filler neck in the top center of the tank 4 – 1/2″ NC threaded holes at each end of the tank to attach the side frames Bottom Tank: This tank has a 4.00″” NPT coupling 3/4″” NPT coupling for a drain 4 – 1/2″” NC threaded holes at each end of the tank to attach the side frames Side Frames: These frames have eight holes to accommodate 1/2″” bolts to attach to the tanks A hole to accommodate a lifting hook 2 holes in the foot plate to attach to a mounting block Series of 3/8″” diameter holes Note: this set comes supplied with four washer bars 66.00″” long with 33 bolt holes
Top Tank: This tank has a 2.25 diameter hose connection 1.00″ diameter bypass connection 1/4″” NPT flanges for sensors etc 1/2″” NPT flange on the grill side for a sight glass 2 – 1/2″” NC threaded holes on each end for lifting Bottom Tank: This tank has a 2.50″” diameter hose connection 1/2″” NPT flange 2 – 10 plate oil coolers with 18.00″” centers 2 – 1/2″” NC threaded holes for mounting Side Frames: 5 – 5/16″” threaded holes along each side for mounting the shroud Block with two 1/2″” NC threaded holes for mounting Note: this set is supplied with four long washer bars.
Top Tank: This tank has two 2.50 diameter hose connections 2 – 1/2″ NPT flanges 4 – mounting blocks ( 2 on top and 2 on the ends) Bottom Tank: This tank has a 4.00″” diameter hose connection 2 mounting pads 2 mounting blocks 1/2″” NPT flange Side Frames: These frames are 58.50″” long
Top Tank: This tank has a 2.00 diameter hose connection 11.00″ from the edge of the tank to the center of the hose connection (angled @ 90 degrees) Hose connection has a 1/4″” NPT flange for a drain 2 – 3/4″” NC bolts @ 32.00″” centers 1/4″” NPT flange 9.00″” from the edge of the tank Frames: 29.00″” tall with a 9 bolt flange 4 – 3/8″” NC nuts along the edge of the frame for mounting the fan shroud
This tank has a 1.75 diameter hose connection 6.75″ from the edge of the tank to the center of the hose connection 1.00″” diameter bypass hose 11.37″” from the edge of the tank 1/4″” NPT flange to accommodate a sensor 1.75″” diameter hole in the top center of the tank to accommodate a filler neck.
This tank has a 2.25 diameter hose connection 2 – 5/8″ NC studs @ 8.00″” centers 1/4″” NPT flange for a drain cock 14 plate oil cooler with fittings @ 18.00″” centers
This 7 plate oil cooler comes supplied with a large faced fastening nut and an O-Ring that sits in a recessed groove. It has an overall length of 11.50, a width of 1.50″
Top Tank: This tank has a 1.75 diameter hose connection 1/4″ NPT flange for an expansion fitting Bottom Tank: This tank has a 2.00″” diameter hose connection 1/2″” NPT flange to accommodate a hose barb 1/4″” NPT flange for a drain Side Frames: These frames are 26.00″” tall Each flange has eight bolt holes Note: this complete tank set is supplied with four washer bars 19.37″” long with 10 bolt holes.
This top tank has an overall height of 5.00 2.50″ NPT nipple hose connection is on the left side 1/2″” NPT coupling for sensor nearby 1/2″” NPT sight glass flange The 2.50″” studs at each end are 3.00″” long Top center of the tank has a truck-sized filler neck hole.
Top Tank : This tank has a 2.25 diameter hose connection 3/4″ diameter bypass hose Two 1/4″” NPT flanges Two 1/2″” diameter flanges for sight glasses 2.00″” diameter pipe on the top for a filler neck Bottom Tank : This tank has a 2.00″” diameter hose connection Three 1/4″” diameter flanges Side Frames : These frames are 44.87″” long and 9.00″” wide There are slotted mounting holes top and bottom Two bolt holes on the bottom Note: this set comes supplied with four long and four short washer bars
