Showing 241–264 of 915 results
Radiator Tanks And Parts
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This air deflector is used between OEM #HV003 and #HV004 units. It ensures the highest volume of air flow through the core.
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This tank has a 2.00 diameter hose connection
1/4″ NPT flange
2 mounting holes on the bottom
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
This tank has two 1.25 NPT couplings facing towards the engine
Bottom Tank:
This tank has two 1.25″ NPT couplings facing towards the ground
This set comes with four long washer bars and four short washer bars. Tanks are made from 3/16″” thick #304 stainless steel.
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This tank has a 2.00 diameter hose connection that comes out on the bottom of the tank and turns towards the engine @ 90 degrees
2 – 1/2″ NC threaded mounting holes
1/4″” NPT flange for a drain cock.
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
This tank has a 2.25 diameter hose connection
1.00″ diameter fill line
2 – 1/2″” NC threaded nuts
2 – 1/4″” NPT flanges
A hole for a filler neck
Bottom Tank:
This tank has a 2.50″” diameter hose connection
1/2″” NC threaded hole at each end for mounting
2 – 1/2″” NPT flanges (one for a drain on the bottom
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
3.00 nipple 4.50″ from the edge of the tank to the center of the nipple
1.50″” fill neck hole on the top center
Threaded bars on each end to mount the side frames
Bottom Tank
2 – 3.00″” nipples 4.50″” in from both ends to the center of the nipples
Threaded bars on each end to mount the side frames
Baffle that runs widthwise at the center of the tank
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
This tank has a 3.50 diameter hose connection
2 – angle brackets on each end with two 7/16″ diameter holes to mount side frames
3/8″” NPT coupling for an expansion fitting
Bottom Tank:
This tank has a 3.50″” diameter hose connection
2 angle brackets on each end with two 7/16″” diameter holes to mount side frames
1.25″” NPT fitting as a filler neck
Sides Rails:
These rails have eight 7/16″” x 1″” slotted holes to accommodate bolts
2 – 7/16″” diameter holes in the center for the cross bars
3/4″” diameter hole for access to the overflow tube (top frame only)
One access hole for the 3/8″” NPT fitting and one access hole for the 1.25″” NPT fitting (top frame only)
This set comes with 4 long and 4 short washer bars
Fill neck plug
51.00″” threaded cross bars.
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
This tank has a 3.50 diameter hose connection
2 angle brackets on each end with two 7/16″ diameter holes to mount side frames
3/8″” NPT coupling for an expansion fitting
Bottom Tank:
This tank has a 3.50″” diameter hose connection
2 angle brackets on each end with two 7/16″” diameter holes to mount side frames
1.25″” NPT fitting as a filler neck
Sides:
These rails have eight 7/16″” x 1″” slotted holes to accommodate bolts
2 – 7/16″” diameter holes in the center for the cross bars
5 – 3/8″” diameter holes along each edge
3/4″” diameter hole for access to the overflow tube (top frame only)
1 access hole for the 3/8″” NPT fitting
1 access hole for the 1.25″” NPT fitting (top frame only)
This set comes with four long and four short washer bars
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This bottom tank has a 2.25 diameter hose connection
1/4″ NPT flange
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top tank:
This tank has two 1.62 diameter hose connections separated by a baffle
1/4″ NPT coupling for an expansion fitting
1/2″” NPT flange for a fill line
A mounting ear on each end to attach frames
Bottom Tank:
This tank has a 1/4″” NPT coupling for an expansion fitting
1/2″” NPT flange for a fill line
A mounting ear on each end to attach frames
Side Frames:
These frames have eight slotted mounting holes
6 – 3/8″” diameter holes to attach to another complete unit (OEM #HV004 or set #081409A)
Holes to allow access to the 1/4″” NPT fittings
Note: this set comes supplied with four washer bars 7.50″” long with 5 bolt holes
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This mounting bracket has a thickness of 3/16. It is used to tie together OEM #HV003 and #HV004 units. (4 per assembly)
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
This tank has two 2.50 diameter hose connections 12.37″ long
1/2″” NPT flange for a fill line
1/4″” NPT coupling for an expansion line
A mounting ear on each end to attach side frames
A baffle separates the two hose connections
Bottom Tank:
This tank has a 1/2″” NPT flange for a fill line
1/4″” NPT coupling for an expansion fitting
Side Frames:
These frames have eight slotted mounting holes
6 – 3/8″” diameter holes to attach a second complete unit (OEM #HV003 or set #081409B)
Holes to access the 1/4″” NPT fittings on the tanks
Note: this set comes supplied with four washer bars 7.50″” long with 5 bolt holes
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
This tank has two 2.00 diameter hose connections 2.75″ long and separated by a baffle
1/4″” NPT flange for an expansion fitting
Threaded mounting block on each end for attaching side frames
Bottom Tank:
This tank has a 1/4″” NPT fitting for a drain cock
Threaded mounting blocks on each end of the tank
Side Frames:
These frames have 4 – 1/2″” wide by 1.25″” long slotted holes for bolting side frames to the tank
This set comes with four long washer bars and four short washer bars.
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
Top Tank:
This tank has 2 – 3/4 NPT couplings separated by a baffle
1/4″ NPT flange for an expansion plug
Threaded mounting blocks on each end for attaching side frames
Bottom Tank:
This tank has a 1/4″” NPT flange for a drain cock
Threaded mounting blocks on each end for attaching side frames
Side Frames:
These frames have 4 – 1/2″” x 1.25″” long slotted holes for bolting on the side frames to the tanks
This set comes with four long washer bars and four short washer bars
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This Detroit Diesel bottom tank has a 2.75 hose connection 7.75″ from the edge of the tank to the center of the hose connection
1/2″” NPT flange for a drain cock
A mounting blocks on each end with a pair of 5/8″” NC threaded holes.
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This frame has a bracket on the back of the frame with five 3/8 NC nuts for various mounting purposes
The headers each have ten bolt holes
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Equipment
- Equipment
- N/A
This tank has a 4.50 diameter hose connection 10.00″ long.
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ford
Radiator Tanks And Parts
Ford
Radiator Tanks And Parts
Ford
- Ford
- N/A
This tank has a 2.50 diameter hose connection
2 – 1/2″ NPT flanges
Corner of the header is cut off at a 45 degree angle
Note: the two 1/2″” NPT fittings are optional. They are welded on all model #FD 680 tanks but are not drilled through. Check against original tank to see if either one is needed
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ford
- Ford
- N/A
Tank tapers in depth from top to bottom. No fittings or openings
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ford
- Ford
- N/A
One 2.50 O.D. hose connection
2 – 1/2″ N.P.T. fittings
2 -5/16″” N.C. threads on the bottom at 2.00″” centers
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ford
- Ford
- N/A
“Low flow” tank with one 1.00 O.D. hose connection
2 – 5/16″ N.C. threaded holes in tank
“””
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ford
- Ford
- N/A
“Low Flow” driver’s side tank
“Blank” tank has two 5/16 N.C. threaded holes
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
