Two openings of 2.00 O.D. pipe straight out
One 1.00″ O.D. hose connection
One 1/8″” N.P.T. fitting on side
One bolt-on type filler at the center on the top front corner
Built-in baffle

“””

One opening of 2.50 O.D. 90 degree facing down and towards center at a 45 degree angle
One 1.00″ O.D. hose connection
One 1/8″” N.P.T. fitting on side
One bolt-on type filler at the center on the top front corner
Built-in baffle

“””

One opening of 2.50 O.D. 90 degree elbow facing down and towards center at a 45 degree angle
One 1.00″ O.D. hose connection
One 1/8″” N.P.T. fitting on side
One bolt-on type filler at the center on the top from corner
Built-in baffle.

“””

Two openings of 2.50 O.D. pipes, one coming out on a 20 degree angle and one coming out on a 45 degree angle, each facing towards the center of the tank
One 1.00″ O.D. hose connection
One 1/8″” N.P.T. fitting on side
One bolt-on type filler at the center of the top front corner|
Built-in baffle

“””

Two openings of 2.25 O.D. pipe straight out
One 1″ O.D. hose connection
One 1/8″” N.P.T. fitting on side
One bolt-on type filler at the center on the top front corner
Built-in baffle

“””

One opening (on driver’s side) of 3.00 O.D. 90 degree elbow facing opposite end of tank (see picture)
One 1/8″ N.P.T. fitting on side
One bolt-on type filler at the center of the top front corner
Built-in baffle

“””

One opening of 2.25 O.D. pipe coming out on approximately 30 degree angle towards the center of the tank
One 1.00 ” O.D. hose connection One 1/8″” N.P.T. fitting on side
One bolt-on type filler at the center of the slanted top
Built-in baffle

“””

To be used with early model top and bottom tanks