This low flow tank has a rounded” header 1.25″” diameter hose connection and a 1.00″” diameter hose connection straight to engine 1/4″” NPT flange on each end A baffle in the center splits the tank top to bottom Note: matches tank #FR452LF
This frame has eight slotted holes on one end Eight round holes on other end Various other holes for brackets, etc. Frames are made to fit either the left or right side for your convenience. (Early model)
Top Tank : This tank has a pair of 2.37 diameter hose connections Mounting bracket at the front center of the tank 1/4″ NPT flange for an expansion fitting Bottom Tank : This tank has a pair of 1/2″” NC bolts 3.00″” long @ 30.00″” centers for mounting 3.00″” diameter hose connection 1.75″” diameter hose connection 3/8″” NPT plug for draining Side Frames : These frames have five 3/8″” NC threaded holes on the back for mounting the frames Ten 5/16″” threaded holes along the sides for mounting the shroud Note: this set comes supplied with two 3/8″” threaded tie rods 50.00″” in length
This tank has a 3.00 diameter hose connection 1/4″ NPT flange for a drain cock Four brackets – each with a slotted hole 14 plate oil cooler with 18.00″” centers (the original oil cooler is a tube and shell type).
Inlet Tank : This tank has a 2.50 diameter hose connection 1/4″ NPT flange on each end of the tank Outlet Tank : This tank has a 3.00″” diameter hose connection 1/4″” NPT flange on each end of the tank 1/4″” NPT x 3/8″” diameter 90o hose barb is provided.
