This tank has a baffle that runs along the length of the tank down the middle 1.00 and a 1.25″ diameter hose connection 1/4″” NPT flange near the 1.00″” hose connection Note: the 1.25″” diameter hose connection runs to the far side of the baffle.
This tank has a 2.75 diameter hose connection The tank header tapers 1/2″ from the engine side to the grill side on the end with the hose connection only
Top Tank : The front side of this tank has a pair of 2.25 diameter hose connections 1.50″ diameter hose connection A pair of 1/4″” NPT flanges for vents The outer ends of the tank have mounting flanges with three 1/2″” holes The top of the tank has a hole to accommodate a fill neck Bottom Tank : This tank has a 3.00″” diameter hose connection A flange for a drain The outer ends of the tank have mounting flanges with a pair of 1/2″” holes Side Frames : These frames are 37.00″” long Five 3/8″” slotted holes up each side for mounting the fan shroud Note: this set comes supplied with washer bars.
This Generator tank set has a top and bottom tank which are identical to each other, with the exception that the top tank has a fill neck hole in the top center of the tank The tank has a 2.00 diameter hose connection 4.00″ long
This set includes all washer bars and center bar The bottom tank has a 5.00 diameter hose connection The top tank is de-aerated The side frames are 11.75″ wide
Tanks (both are identical) These tanks have a 2.00 diameter hose connection Two 1/4″ NPT flanges Two threaded bars with two 1/2″” NC holes on each end to mount the side frames Top tank has a hole in the top center for a filler neck Side Frames : Each of these frames has eight 3/4″” diameter holes to mount to the tanks Two 1/2″” thick feet on the bottom with two 3/4″” diameter holes for mounting to the floor This tank set includes four long and four short washer bars.
Top Tank : This tank has a 2.00 diameter hose connection 1/4″ NPT flange to accommodate an expansion tube Bottom Tank : This tank has a 2.00″” diameter hose connection 1/4″” NPT flange to accommodate a drain cock Side Frames : These frames have four 5/16″” NC nuts along the fan and grill side A 8.37″” diameter bolt hole flange Note: this set comes supplied with four washer bars 24.87″” long with 13 bolt holes.
Top Tank : This tank has a 1.75 diameter hole on the top center to accommodate a truck filler neck 2.25″ diameter hose connection 1/8″” diameter bypass hose A de-aeration baffle A curved bar with threaded holes to attach the engine cover Bottom Tank : This tank has a 2.25″” diameter hose connection 3/4″” NPT flange for drainage Four 5/8″” NC nuts for mounting Side Frames : These frames have a 9 bolt hole flange Five 5/16″” NC bolt holes run along the width 3/8″” NC nut is in the back center of the frame Two 5/16″” NC nuts are on the back edge Four 5/16″” NC nuts run along the fan side Three 5/16″” NC nuts run along the grill side Note: this set comes supplied with brackets – two bolt holes on one face
This tank has a 2.50 diameter hose connection 5.50″ from the edge of the tank to the center of the hose connection 1/4″” NPT fitting on end for an expansion tube
Top Tank : This tank has a 2.50 diameter hose connection facing towards the engine 1/4″ NPT flange for an expansion barb Bottom Tank : This tank has a 2.50″” diameter hose connection facing downward from the radiator 1/4″” NPT fitting for a drain cock Note: This tank kit can be ordered in brass – #IN9214
Top Tank : This tank has a 2.50 diameter hose connection 4.00″ from the edge of the tank to the center of the hose connection 1/4″” NPT flange Bottom Tank : This tank has a 2.50″” diameter hose connection 5.50″” from the edge of the tank to the center of the hose connection 1/4″” NPT flange for a drain cock Holes @ 18.00″” centers to accommodate on oil cooler
Inlet Tank : This tank has a 2.50 diameter hose connection 5.75″ from the edge of the tank to the center of the hose connection 1/4″” NPT flange Outlet Tank : This tank has a 2.50″” diameter hose connection on the end of the tank facing downward towards the ground 1/4″” NPT flange on the opposite end of the tank Note: this tank set matches brass kit #IN9215.
Inlet Tank : This tank has a 2.50 diameter hose connection 5.75″ from the edge of the tank to the center of the hose connection 1/4″” NPT flange to accommodate a drain cock Outlet Tank : This tank has a 2.50″” diameter hose connection that points towards the ground 1/4″” NPT flange to accommodate an expansion tube This set comes wit a 1/4″” NPT drain cock
