Showing 745–768 of 915 results
Radiator Tanks And Parts
Radiator Tanks And Parts
New Flyer Bus
- New Flyer Bus
- N/A
This tank has a pair of 2.50 diameter hose connections – one on either side of the deflection baffle
1/4″ NPT flange on the bottom of the tank
1/4″ NPT flange on the side of the tank
4 Mounting brackets
Note: this tank shares the bolt pattern with tank #NF082306C.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ottawa Shunt Truck
- Ottawa Shunt Truck
- N/A
This frame has four bolt holes on each flange, eight 5/16 NC threaded holes on the back of the frame, a block on the back of the frame with twelve 3/8″ NC threaded holes to attach the mounting bracket (sold separately – part #OS 051909D), and three 5/16″ NC threaded holes along the side of the frame for mounting the shroud.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ottawa Shunt Truck
- Ottawa Shunt Truck
- N/A
This tank has a bolt-on style flange to accommodate a 2.25 diameter hose connection. This flange angles slightly upward. There is a 10 plate oil cooler with 18.00″ centers (DRC 1018PC), a 1/4″ NPT flange for a drain cock, a 1/2″ NPT flange, a 3/4″ flange on the bottom, and a large mounting bracket in the center of the tank.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ottawa Shunt Truck
- Ottawa Shunt Truck
- N/A
This tank has a 2.00 diameter hose connection, a 1.00″ diameter bypass connection, a 1/2″ NPT flange, a 1/4″ NPT flange for a drain cock on the grill side of the tank, a mounting bracket with three holes for bolting into the unit and one larger hole for the isolation rubber, an extension bracket with the same bolt pattern as the mounting bracket, and a seven plate oil cooler with 18.00″ centers (DRC 718PC).
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ottawa Shunt Truck
- Ottawa Shunt Truck
- N/A
This shroud has overall dimensions of 26.00 x 24.50″ x 4.00″ deep. There is a 23.75″ diameter hole for the fan, four 5/16″ threaded mounting nuts, six slotted holes for mounting the shroud to the radiator, and two large access slots to accommodate a hose.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ottawa Shunt Truck
- Ottawa Shunt Truck
- N/A
This bracket attaches to side frame #OS 051909B. It has one large hole for an isolation grommet. Note: brackets are for left or right – order accordingly
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ottawa Shunt Truck
- Ottawa Shunt Truck
- N/A
This Ottawa Shunt Truck tank has two bolt-on style flanges to accommodate 2.25 diameter hose connections. The flanges are 2.50″ in from the edge of the tank to the center of the flange, and they angle upward slightly towards the engine. There is a 12 plate 16.00″ center oil cooler with 3/4″ NPT fittings, positioned between the flanges, a 1/4″ NPT flange near the bottom of the tank for a drain cock, and a large mounting bracket at the bottom center of the tank.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Ottawa Shunt Truck
- Ottawa Shunt Truck
- N/A
This frame has four 5/16 NC threaded holes and four 1/4″ NC threaded holes along the back, and a block with a series of 3/8″ NC threaded holes to attach a mounting bracket to the back of the frame.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Osh Kosh
- Osh Kosh
- N/A
Two bolt on type flanges with two 7/16″ N.C. threaded holes in each. One
1/8″ N.P.T. fitting, two 1/4″ N.P.T. fittings and three 3/4″ N.P.T. fittings –
one facing engine and two on top of the tank. Three brackets on tank facing
engine. Three brackets on top of tank and two angle brackets on front of
tank. One 2.00″ O.D. pipe on top of tank for filler neck.
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Osh Kosh
- Osh Kosh
- N/A
Tank is 1.50″ deep. Two 5/8″ N.C. threaded mounting nuts at 8.00″ centers.
Two bolt on type flanges, both with two 7/16″ N.C. threaded holes at 3.56″ centers and one with an additional four 3/8″ N.C. threaded holes. One 3/8″ N.P.T. drain.
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Osh Kosh
- Osh Kosh
- N/A
This tank is 1.50 deep. It has two 5/8″ NC threaded mounting nuts at 8.00″ centers, two bolt-on type flanges both with two 7/16″ NC threaded holes at 3.56″ centers and one with an additional four 3/8″ NC threaded holes, and a 3/8″ NPT drain.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
This tank has a bolt-on style flange 11.00 from the edge of the tank to the center of the hose connection, a 1/4″ NPT flange, and a filler neck hole in the top of the tank.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Inlet & Outlet have a 2.50 Connection 1/4″ NPT 4 Mounting Bosses to Attach Side Frames Identical to KW110409A except the height of the Upper Connection
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
This tank is a modified version of tank #PB 705. Identical, except for being narrower in width.
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Top Tank This tank has a 2.50 diameter hose connection 8.50″ from the edge of the tank to the center of the hose connection, and a 1/4″ NPT flange to accommodate a barb fitting. Bottom Tank This tank has a 2.50″ hose connection 4.00″ from the edge of the tank to the center of the hose connection, and 1/4″ NPT flange to accommodate a drain cock.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Both of these tanks are identical. Each has a 2.50 hose connection 4.00″ from the edge of the tank to the center of the hose connection, and a 1/4″ NPT flange for either a drain cock or a vent. This tank set comes with a 1/4″ NPT drain cock, and a 1/4″ NPT x 3/8″ hose barb.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Top Tank This tank has a 2.50 diameter hose connection 8.50″ from the edge of the tank to the center of the hose connection, a 1/4″ NPT flange for a barb fitting, and two mounting pins. Bottom Tank This tank has a 2.50″ diameter hose connection 5.75″ from the edge of the tank to the center of the hose connection and pointing towards the ground, and two mounting pins. Side Frames These frames are 35.75″ long, with two indentations with holes in the center. These frames are interchangeable.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Top Tank This tank has a 2.50 diameter hose connection 13.00″ from the edge of the tank to the center of the hose connection, a 1/4″ NPT flange for a vent, and two mounting bosses at each end of the tank. Bottom Tank This tank has a 2.50″ diameter hose connection 12.87″ from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank. This set is supplied with eight 5/16″ x 4.50″ bolts with nuts, and a 90 degree hose barb for the vent. Note: this tank set matches brass kit #PB 9506.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Both of these tanks are identical. Each has a 2.50 diameter hose connection 13.87″ from the edge of the tank to the center of the hose connection, two mounting bosses on each end to attach side frames, and a 1/4″ NPT flange to accommodate a drain cock or expansion fitting. This tank set is supplied with eight 5/16″ x 4.50″ bolts with nuts, a 1/4″ NPT drain cock, and a 1/4″ NPT 90 degree hose barb.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
This mounting bracket is the same as bracket #PB 7191, except that it has only two holes that are centered instead of four holes off center.
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Top Tank This tank has a 2.50 diameter hose connection, four mounting bosses to attach side frames, and a 1/4″ NPT flange for an expansion fitting. Bottom Tank This tank has a 2.50″ diameter hose connection, and four mounting bosses to attach the side frames.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
This tank has two bolt-on type flanges with two 7/16 NC threads in each, a 1.75″ hole for a filler neck, a 1/2″ NPT flange between the two bolt-on flanges, and a 1/8″ and three 1/4″ NPT flanges. This tank has a built-in baffle.
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
Two bolt-on type flanges with two 7/16 N.C. threads in each. One 1/8″, one 3/4″ and two 1/4″ N.P.T. fittings. One 1.75″ hole on top for filler neck
“
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Radiator Tanks And Parts
Peterbilt
- Peterbilt
- N/A
This tank is the same as tank #PB 700, except the header flange is wider
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
