Flanges have 3 – 5/16 NC threaded holes along the back 4 – 3/8″ NC threaded mounting holes in the back of the frame 3 – 5/16″” NC threaded holes along the edge of the frame for mounting the shroud Left and Right are not interchangeable
2.50 diameter hose connection that is 9.00″ from the edge of the tank to the center of the hose connection 1/4″” NPT flange on end of tank Bolt pattern same as # BS7433
Top Tank : This tank has a 2.00 diameter hose connection 4 – 1/4″ NPT flanges Bottom Tank: This tank has a 2.00″” diameter hose connection 1 -1/4″” NPT flange for a drain cock 2 – holes to accommodate a #DRC 718PC plate oil cooler.
3 – 5/16 NC threaded holes along the side of the frame 6 – 3/8″ NC threaded holes along the back of the frame 2 reinforcement plates covering four of the six 3/8″” NC threaded holes. Each flange has 6 bolt holes (6 BH).
Each flange has 10 bolt holes 4 – 5/16 NC threaded holes 4 – 1/4″ NC threaded holes 2 -1/2″” NC nuts on the back of the frame 2 – 1/4″” NC threaded holes along the edge of the frame The opposite frame is identical except that it only has one 1/2″” NC threaded hole on the back
These brackets are made for Bus side frames. Each bracket is unique, having it’s own bolt holes, slotted holes, and notch-outs, designed for specific applications.
5 – 1/4 NC threaded holes along the edge of the frame 4 – 3/8″ NC threaded holes 2 – 1/4″” NC threaded holes along the opposite edge Mounting bracket on the back of the frame
A mounting bracket on the back (offset to one side) 5 – 1/4 NC threaded holes along one edge 4 – 3/8″ NC threaded holes along the opposite edge of the frame Note: this frame matches tank #BS7416.
