Top Tank :
This tank has a 2.37 diameter hose connection
Two sleeves for mounting bolts
A 1/4″ NPT flange on the top of the tank (for a 90 degrees hose barb)
Eight 1/4″” NPT threaded blocks
Two 5/16″” NC nuts in the top of the tank
Bottom Tank :
This tank has a 2.50″” diameter hose connection
Two sleeves for mounting bolts
A 1/2″” NPT flange (for a drain cock)
Eight 1/4″” NPT threaded blocks
Two holes @ 12.00″” centers to accommodate an oil cooler (to be supplied by the customer)
Hose conn. 7.50″” from end to center
Note: this tank set is used with a Mercedes engine.
“””
Product Comment
Top Tank :
This tank has a 2.37 diameter hose connection
Two sleeves for mounting bolts
A 1/4″ NPT flange on the top of the tank (for a 90 degrees hose barb)
Eight 1/4″” NPT threaded blocks
Two 5/16″” NC nuts in the top of the tank
Bottom Tank :
This tank has a 2.50″” diameter hose connection
Two sleeves for mounting bolts
A 1/2″” NPT flange (for a drain cock)
Eight 1/4″” NPT threaded blocks
Two holes @ 12.00″” centers to accommodate an oil cooler (to be supplied by the customer)
Hose conn. 7.50″” from end to center
Note: this tank set is used with a Mercedes engine.
“””