Gillig Bus Threaded Washer Bar

Each flange has 9 bolt holes –
3 tapped 5/16 NC threads
6 drilled for 5/16″ bolts
One side has four 5/16″” NC threads @ 6 1/4″” centers
Other side has five 5/16″” NC threads
2 gussets have a 5/16″” NC nut
the back of the channel has 11 – 3/8″” NC threads two groups of four and one group of three

“””

Top and bottom flange each have 4 bolt holes
4 – 3/8 NC threaded holes on each side of the rail

“

Top and bottom flanges each have 12 bolt holes :
4 have 5/16 NC threaded holes
The engine side has 5 – 5/16″ NC threaded holes
The grille side has 4
2 brackets
Frames are not interchangeable

“””

8 – 3/8 NC threaded holes and 2 -1/4″ threaded holes on each edge
Mounting bracket on the back of the frame

“””

Each end has 8 holes :
4 tapped 5/16 NC
4 drilled for 5/16″ bolts
4 – 3/8″” NC threaded holes on back of channel
3 – 5/16″” NC threaded holes on one side and one on the other
frame works for both left and right
matches tanks #BS750 and #BS751

“””

6 – 3/8 holes and 2 – 5/16″ NC threaded holes in the flange
Inner channel w/ 16 – 3/8″” NC threaded holes for mounting of various brackets
4 – 5/16″” NC threaded holes along the side of the frame for mounting the shroud

“””

Top and bottom flanges each have 8 threaded holes(4 tapped 5/16 NC)
Angle bracket on one side with 3 – 3/8″ NC threaded holes
3 – 3/8″” NC threaded holes on the other side of channel
4 – 3/8″” NC threaded holes on back of channel
“”Z”” shape bracket on the back with a 1/2″” diameter hole in the center
These frames are not interchangeable

“””