Top Tank : This tank has a 2.00 diameter hose connection 1.37″ diameter hole in the top center for a fill neck 2 – 5/16″” NC threaded holes at each end to attach side frames Bottom Tank : This tank has a 2.00″” diameter hose connection 1/4″” NPT flange for a drain 2 – 5/16″” NC threaded holes at each end to attach side frames 3/4″” diameter bypass hose connection
Top Tank : This tank has a 2.00 diameter hose connection Hole for a filler neck 2 – 5/16″ NC threaded holes on each side of the tank for attaching the side frames Bottom Tank : This tank has a 2.00″” diameter hose connection 1/4″” flange for a drain cock 2 – 5/16″” threaded holes on each side of the tank for attaching the side frames
Top Tank : This tank has a 2.50diameter hose connection 3.50″ long 1 – 1/4″” NPT flange Bottom Tank : This tank has a 2.87″” diameter hose connection 3.50″” long 1 -1/4″” NPT flange at each end of the tank Includes side frames and shroud
Top Tank : This tank has a 2.00 diameter hose connection 1/2″ NPT flange for a sight glass 4 – 5/16″” NC mounting nuts to attach side frames This tank is 2.00″” shallower than the kit #CAT2103CK counterpart Bottom Tank :#CAT2103B This tank has a 2.25″” diameter hose connection 1/4″” NPT flange for a drain cock 4 – 5/16″” NC mounting nuts to attach side frames
Top Tank : This tank has a 2.25 diameter hose connection 4 – 5/16″ NC threaded nuts to attach the side frames 1/4″” NPT flange for an expansion fitting Bottom Tank : This tank has a 2.25″” diameter hose connection 1.00″” diameter bypass hose connection 3/8″” NPT flange for a sensor fitting 4 – 5/16″” NC threaded nuts to attach the side frames
Top Tank : This tank has a 2.00 diameter hose connection Mounting block on each end with 2 – 5/16″ NC threaded holes Hole in the top center of the tank for a filler neck Bottom Tank : This tank has a 2.00″” diameter hose connection Mounting block on each end with 2 – 5/16″” threaded holes Locating pin to position the radiator into the frame 1 – 1/4″” NPT flange for a drain
Top Tank : This tank has a 2.25 diameter hose connection 4 – 1/4″ NPT flanges 3/4″” NPT coupling Hole to accommodate a fill neck 2.50″” NPT coupling on the top of the tank Deflection baffle with a built-in box for the hose connection Bottom Tank : This tank has a 2.50″” diameter hose connection 2 – 1/4″” NPT flanges Frames : 10 bolt flange at each end Bracket along the fan edge for mounting
Top Tank : This tank has a 2.00 diameter hose connection 2 lifting brackets on the top of the tank 1.25″ hole on the top for a filler neck 2 threaded mounting nuts on the backside of the tank Bottom Tank : This tank has a 2.00″” diameter hose connection 2 mounting pins on the bottom of the tank 1/4″” NPT flange for a drain cock
Top Tank : This tank has a 2.00 diameter hose connection Filler neck hole in the top center of the tank Bottom Tank This hole has a 2.00″ diameter hose connection 1/4″” NPT flange for a drain cock
This tank has a bolt-up type flange with 4 – 3/8 NC threaded holes, located in the center of the tank, to accommodate a 2.50″ diameter hose connection There are threaded bars welded along the header
Top and bottom tanks have a 2.00 diameter hose connection Top tank has a filler neck Bottom tank has a drain cock Both tanks have mounting brackets on each end.
Top Tank : This tank has a 1.50 diameter hose connection Filler neck on the top driver side Bottom Tank : This tank has a 1.50″ diameter hose connection Hole for a 1/4″” NPT flange and drain cock (supplied) Larger NPT flange.
This tank has a 2.50 diameter hose connection 9.25″ from the edge of the tank to the center of the hose connection 3/4″” diameter bypass hose that bends 90 degrees towards the passenger side Wabco fill neck hole in the top center of the tank (offset towards the grill) 2 – 1/4″” NPT flanges (one in the corner for an expansion fitting
This tank has a 2.00 diameter hose connection in the middle of the tank 1.75″ diameter hole in the top center of the tank to accommodate a truck filler neck This tank also contains a baffle to create a surge-like area inside the tank.
This tank has a 2.25 diameter hose connection 5.00″ from the edge of the tank to the center of the hose connection 1/4″” NPT flange next to the hose connection to accommodate an expansion tube
Wabco fill neck in the top center of the tank 2.25 diameter hose connection 2.75″ long 1/4″” NPT flange in the center of the tank facing the engine 3/8″” overflow tube vent The overall height of this tank is 4.00″” (not including the fill neck).
