This tank has a 3.00 hose connection, 11.50″ from the edge of the tank to the center of the hose connection. The connection comes first straight down out of the tank
Product OEM
| Year-from | 1970 |
|---|---|
| Year-to | 1970 |
| Product-oem | 3MF5490M |
| Make | Peterbilt |
| Product Type | Radiator Tanks And Parts |
ADDITIONAL PARTS YOU MAY NEED
Truck
Radiators
Volvo
- Volvo
- VNL,VN
2008-2015 Volvo VN Series
2008-2015 Mack CXU Vision
With Framework
With Oil Cooler
CORE DIMENSIONS
- 35.37"
- 2.00"
- 2.50" Top Left
- 2.50" Bottom Right
Truck
Dodge
- Dodge
- Dodge w/ 5.9L Cummins,Dodge w/ 6.7L Cummins
Dodge Charge Air Cooler
2003 – 2007 5.9L Cummings
2007 – 2008 6.7L Cummings
CORE DIMENSIONS
- 24.68"
- 2.20"
- 3.00"
- 3.00"
Truck
Ford
- Ford
- L Series
1990-1994 Ford Louisville 7000-8500
CORE DIMENSIONS
- 26.87"
- 1.50"
- N/A
- N/A
Truck
Radiators
Freightliner
- Freightliner
- FL80,FL90,FL50,FL60,FL70,MB70
Freightliner Radiator
Fits FL50 – 90 Series
PTO crank box
18.00 Oil Cooler
“
CORE DIMENSIONS
- 24.50"
- 2.12"
- 2.00" Top Left
- 2.25" Bottom Right
Truck
Radiators
International
- International
- 8100 Series
International Radiator
Fits 1990 – 1992 8100 Series
with Cummins Low Flow Engine Cooling System
Must re-use O.E. Frame Brackets
O.E. Frame Must Solder Back On
*Available in Solder on Not Bolt on*
CORE DIMENSIONS
- 26.31"
- 2.25"
- 4.00"
- 4.00" 1.00" Bottom Right 1.25" Bottom Left
Truck
Radiators
International
- International
- 7300 Series,4400 Series,4300 Series,4200 Series,4100 Series,7400 Series,7500 Series,7600 Series,7700 Series
International Radiator
Fits 1993 – 1996 4100 – 4400/7300 – 7700 Series
CORE DIMENSIONS
- 12.625"
- 2.00"
- 2.50" Top Center
- 2.25" Bottom Left
Truck
Surge Tanks
International
- International
- N/A
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Truck
Radiators
Mack
- Mack
- CS300,MS Model,CS200
1995-2001 Mack Midliner
CORE DIMENSIONS
- 22.375"
- 2.00"
- 2.00" Top Left
- 2.50" Bottom Left





Product Comment
This tank has a 3.00 hose connection, 11.50″ from the edge of the tank to the center of the hose connection. The connection comes first straight down out of the tank, then bends at 90 degrees to face the engine. This tank is similar to the PB 7195, except that the hose connection does not sweep upward. Note: this tank shares the bolt hole pattern with tank #PB 719 and tank #PB 708.
“