Top and bottom flanges each have 12 holes, 4 tapped 5/16″ N.C. threads
and 8 drilled clearance for 5/16″ bolts. Each side of channel has 4 – 1/4″
N.C. threaded holes. Back of channel has ten 3/8″ N.F. threaded holes.
NOTE: Side frames are interchangeable.
Product OEM
| Product-oem | 3MF5490M |
|---|---|
| Make | Western Star |
| Product Type | Radiator Tanks And Parts |
ADDITIONAL PARTS YOU MAY NEED
Truck
Ford
- Ford
- L Series
1990-1994 Ford Louisville 7000-8500
CORE DIMENSIONS
- 26.87"
- 1.50"
- N/A
- N/A
Truck
Radiators
International
- International
- N/A
2008-2010 International PayStar 5000 Series
CORE DIMENSIONS
- N/A
- N/A
- N/A
- N/A
Truck
GMC
- GMC
- TOPKICK,KODIAK
Chevy/GM Charge Air Cooler
Fits Topkick, Kodiak
CORE DIMENSIONS
- 26.30"
- 1.75"
- 3.50"
- 3.00"
Truck
Radiators
Mack
- Mack
- MS Model,MIDLINER,CS300
Mack Radiator
Fits 1995 – 2001Mack Midliner
*Available in Solder On Only*
CORE DIMENSIONS
- 22.375"
- 2"
- 4.00"
- 4.00"
Truck
Ford
- Ford
- L Series,Day Cab
Ford Charge Air CoolerFord L9000 Day Cab up to 1994
CORE DIMENSIONS
- 26.87"
- 1.62"
- 3.50"
- 3.50"
Truck
Radiators
International
- International
- 7300 Series,4400 Series,4300 Series,4200 Series,4100 Series,7400 Series,7500 Series,7600 Series,7700 Series
International Radiator
Fits 1993 – 1996 4100 – 4400/7300 – 7700 Series
CORE DIMENSIONS
- 12.625"
- 2.00"
- 2.50" Top Center
- 2.25" Bottom Left
Truck
Radiators
International
- International
- 3600 Series,3000 Series,3800 Series
1994-2002 International 4700-4800-4900 Half Core. (Side By Side)
2001-2004 International CE Bus
Oil Cooler on Grill Side
CORE DIMENSIONS
- 12.125"
- 2.00"
- 2.50" Top Center
- 2.25" Bottom Left
Truck
Radiators
International
- International
- 8100 Series
International Radiator
Fits 1990 – 1992 8100 Series
with Cummins Low Flow Engine Cooling System
Must re-use O.E. Frame Brackets
O.E. Frame Must Solder Back On
*Available in Solder on Not Bolt on*
CORE DIMENSIONS
- 26.31"
- 2.25"
- 4.00"
- 4.00" 1.00" Bottom Right 1.25" Bottom Left





Product Comment
Top and bottom flanges each have 12 holes, 4 tapped 5/16″ N.C. threads
and 8 drilled clearance for 5/16″ bolts. Each side of channel has 4 – 1/4″
N.C. threaded holes. Back of channel has ten 3/8″ N.F. threaded holes.
NOTE: Side frames are interchangeable.