This tank has a bolt-on style flange to accommodate a 2.25 diameter hose connection. This flange angles slightly upward. There is a 10 plate oil cooler with 18.00″ centers (DRC 1018PC)
Product OEM
| Year-from | 1970 |
|---|---|
| Year-to | 1970 |
| Product-oem | 3MF5490M |
| Make | Ottawa Shunt Truck |
| Product Type | Radiator Tanks And Parts |
ADDITIONAL PARTS YOU MAY NEED
Truck
Radiators
Osh Kosh
- Osh Kosh
- N/A
Osh Kosh Radiator
Fits Safari Motorhomes
CORE DIMENSIONS
- 26.12"
- 2.25"
- N/A
- N/A
Truck
Radiators
GMC
- GMC
- C7000,C6000,C5500,C70,C60
GMC Radiator
1997 – 1998 Kodiak
7.00c.l.- 6 plate oil cooler in left tank
cross flow radiator
Metal Tanks
“
CORE DIMENSIONS
- 25.37"
- 1.37"
- N/A
- N/A
Truck
GMC
- GMC
- KODIAK,TOPKICK
Chevy/GM Charge Air Cooler
Fits Topkick, Kodiak
CORE DIMENSIONS
- 26.25"
- 1.75"
- N/A
- N/A
Truck
Radiators
International
- International
- 8100 Series
International Radiator
Fits 1990 – 1992 8100 Series
with Cummins Low Flow Engine Cooling System
Must re-use O.E. Frame Brackets
O.E. Frame Must Solder Back On
*Available in Solder on Not Bolt on*
CORE DIMENSIONS
- 26.31"
- 2.25"
- 4.00"
- 4.00" 1.00" Bottom Right 1.25" Bottom Left
Truck
Radiators
Freightliner
- Freightliner
- FL80,FL90,FL50,FL60,FL70,MB70
Freightliner Radiator
Fits FL50 – 90 Series
PTO crank box
18.00 Oil Cooler
“
CORE DIMENSIONS
- 24.50"
- 2.12"
- 2.00" Top Left
- 2.25" Bottom Right
Truck
Crane Carrier
- Crane Carrier
- N/A
Various Oshkosh & Advanced Mixers Charge Air Cooler
**Available Re-core Only**
CORE DIMENSIONS
- 19.00"
- 2.00"
- 4.00 "
- 4.00"
Truck
Radiators
Mack
- Mack
- MS Model,MIDLINER,CS300
Mack Radiator
Fits 1995 – 2001Mack Midliner
*Available in Solder On Only*
CORE DIMENSIONS
- 22.375"
- 2"
- 4.00"
- 4.00"
Truck
Radiators
Kenworth
- Kenworth
- N/A
Kenworth Radiator
Fits T400B/T450B/T600/T800
*Available only in Solder On Tanks*
CORE DIMENSIONS
- 27.43"
- 2.00"
- 2.50" Top Left
- 2.50" Bottom Right
Product Comment
This tank has a bolt-on style flange to accommodate a 2.25 diameter hose connection. This flange angles slightly upward. There is a 10 plate oil cooler with 18.00″ centers (DRC 1018PC), a 1/4″ NPT flange for a drain cock, a 1/2″ NPT flange, a 3/4″ flange on the bottom, and a large mounting bracket in the center of the tank.
“