2 bolt on flanges 2 – 5/16 NC threaded nuts on each end of the tank 2 – 5/16″ NC threaded nuts along the fan side 4 – 7/16″” NC threaded bosses on top of tank for mounting purposes
These frames have 2 – 4 bolt flanges with 3/8 NC threaded nuts on the back of the frame for mounting 4 – 5/16″ NC threaded holes along the side for mounting the fan and shroud
Removable inner channels 3 – 3/8 threaded nuts for attaching the shroud Five of the nine bolt holes on the flange are threaded @ 5/16″ NC Note: the original side frames have gusset style flanges.
Top Tank – 2.00 diameter hose connection Pair of pin mounts 1/4″ NPT flange for an expansion tube 4 – 1/4″” NC threaded blocks on the grill side of the tank Bottom Tank Oil cooler ”
Top Tank – 2.00 diameter hose connection Pair of pin mounts 1/4″ NPT flange for an expansion tube 4 – 1/4″” NC threaded blocks on the grill side of the tank. Bottom Tank – Oil cooler holes @ 18.00″” centers 2.00″” diameter hose connection 1/4″” NPT flange for a drain Pair of pin mounts 4 -1/4″” NC threaded nuts along the grill side of the tank. Note: also has Ford Sterling applications.
8 – 3/8 and 2 – 5/16″ threaded holes along each side of the frame 8 – 3/8″” threaded holes along the back of the frame An angle on the inside of the frame.
This bracket has a cutout in the bracket, on the cutout side the bolt holes have 5/16 NC threaded nuts 4 – 3/8″ NC threaded nuts on the back of the bracket 2 – two 3/8″” NC and 2 – 5/16″” NC threaded holes on the cutout face of the bracket This bracket has 11 bolt holes that attach it directly to the header
8 – 5/16 NC threaded nuts on the face of the bracket A boss for a cross bar A cutout for the CAC casting Several clearance holes for attaching the bracket to the side frames
This bracket has eight 5/16 threaded nuts on the face of the bracket, a boss for a cross bar, a cutout for the CAC casting, and several clearance holes for attaching the bracket to the side frame
2 bosses for cross bars 2 – 5/16 NC and 1 – 3/8″ NC threaded holes along one edge 1 – 5/16″” NC and 1 – 3/8″” NC threaded hole along the opposite edge 8 – 3/8″” NC threaded holes along the back of the frame Slotted hole in the back
This low profile tank (1.62) has a 2.75″ diameter hose connection 3.12″” from the edge of the tank to the center of the hose connection 3/8″” NPT flange in the hose connection for either a drain or an expansion tube. Shown here with the matching bottom tank
Low profile tank has a large flange connection w/ 4 – 3/8 NC threaded blind bolt holes 12.50″ from the edge of the tank to the center of the 2.37″” diameter hole in the flange
5 – 5/16 NC threaded holes along one edge of the frame 6 – 5/16″ C threaded holes along the opposite edge 8 – 5/16″” NC threaded holes along the back of the frame 4 notches on the edges Frame #BS042009A is manufactured w/ 10 gauge material Frame #BS042009B is manufactured w/ 3/16″” material
