This tank has a 2.50 diameter hose connection
2 – 1/2″ NPT flanges
Corner of the header is cut off at a 45 degree angle
Note: the two 1/2″” NPT fittings are optional. They are welded on all model #FD 680 tanks but are not drilled through. Check against original tank to see if either one is needed
“””
Product OEM
| Year-from | 1970 |
|---|---|
| Year-to | 1970 |
| Product-oem | 3MF5490M |
| Make | Ford |
| Product Type | Radiator Tanks And Parts |
ADDITIONAL PARTS YOU MAY NEED
Truck
Ford
- Ford
- L Series,Day Cab
Ford Charge Air CoolerFord L9000 Day Cab up to 1994
CORE DIMENSIONS
- 26.87"
- 1.62"
- 3.50"
- 3.50"
Truck
Dodge
- Dodge
- 35,002,500
Dodge Charge Air Cooler
1994 – 2004 Dodge Ram 2500/3500 Available in Powermax
CORE DIMENSIONS
- 15.51"
- 2.25"
- 3.75"
- 3.75"
Truck
Radiators
International
- International
- 3600 Series,3000 Series,3800 Series
1994-2002 International 4700-4800-4900 Half Core. (Side By Side)
2001-2004 International CE Bus
Oil Cooler on Grill Side
CORE DIMENSIONS
- 12.125"
- 2.00"
- 2.50" Top Center
- 2.25" Bottom Left
Truck
Radiators
Volvo
- Volvo
- VNL,VN
2008-2015 Volvo VN Series
2008-2015 Mack CXU Vision
With Framework
With Oil Cooler
CORE DIMENSIONS
- 35.37"
- 2.00"
- 2.50" Top Left
- 2.50" Bottom Right
Truck
Radiators
International
- International
- 8100 Series
International Radiator
Fits 1990 – 1992 8100 Series
with Cummins Low Flow Engine Cooling System
Must re-use O.E. Frame Brackets
O.E. Frame Must Solder Back On
*Available in Solder on Not Bolt on*
CORE DIMENSIONS
- 26.31"
- 2.25"
- 4.00"
- 4.00" 1.00" Bottom Right 1.25" Bottom Left
Truck
Surge Tanks
International
Truck
GMC
- GMC
- KODIAK,TOPKICK
Chevy/GM Charge Air Cooler
Fits Topkick, Kodiak
CORE DIMENSIONS
- 26.25"
- 1.75"
- N/A
- N/A
Truck
Dodge
- Dodge
- Dodge w/ 5.9L Cummins,Dodge w/ 6.7L Cummins
Dodge Charge Air Cooler
2003 – 2007 5.9L Cummings
2007 – 2008 6.7L Cummings
CORE DIMENSIONS
- 24.68"
- 2.20"
- 3.00"
- 3.00"
Product Comment
This tank has a 2.50 diameter hose connection
2 – 1/2″ NPT flanges
Corner of the header is cut off at a 45 degree angle
Note: the two 1/2″” NPT fittings are optional. They are welded on all model #FD 680 tanks but are not drilled through. Check against original tank to see if either one is needed
“””